NAPIT Electrical Approved
HSMITH Electrical Services
Back to articles

Consumer Units

Consumer Unit Upgrade: A Complete Guide for Homeowners

April 20255 min readHSMITH Electrical Services

Your consumer unit — sometimes still called a fuse box or fuse board — is the heart of your home's electrical system. Every circuit in your house runs through it. If yours is old, undersized, or made from plastic, it may be time for an upgrade.

What is a consumer unit?

A consumer unit is a metal or plastic enclosure that houses your circuit breakers, RCDs (residual current devices), and main switch. When something goes wrong on a circuit — an overload, a fault, or an electric shock risk — it's the consumer unit that detects it and cuts the power. It's your home's primary electrical safety device.

Signs you need a consumer unit upgrade

It's made of plastic

The 18th Edition of BS 7671 (the wiring regulations) requires consumer units in domestic properties to be housed in non-combustible enclosures — i.e. metal. Plastic consumer units are no longer compliant for new installations and should be replaced.

You have old rewirable fuses

If you have a fuse box where you have to replace wire when a fuse blows, it's very old and should be upgraded. These offer no protection against electric shock and significantly less against fire.

There's no RCD protection

RCDs are the devices that detect when electricity is flowing through a person (like an electric shock scenario) and cut the power in milliseconds. If your board doesn't have RCDs protecting circuits — especially in kitchens, bathrooms, and outdoors — it needs upgrading.

Circuits trip repeatedly

If you're constantly resetting circuit breakers, it could indicate that your board is too small for modern demand, that a circuit is overloaded, or that the breakers are worn out.

You're adding a new circuit

Installing an EV charger, adding a kitchen extension, or creating a home office often requires a new circuit. If your existing board is full, an upgrade is the most cost-effective solution.

What does a consumer unit upgrade involve?

Here's what happens when we upgrade your consumer unit:

  1. 1
    IsolationWe isolate the supply at the meter and remove the old consumer unit.
  2. 2
    New board installationWe fit a new metal consumer unit with modern MCBs (circuit breakers) and RCDs sized correctly for your property.
  3. 3
    Circuit testingAll existing circuits are tested against the requirements of BS 7671 to confirm they're in good order.
  4. 4
    Earthing and bonding checkWe check and update your main earth and bonding conductors to current standards.
  5. 5
    CertificationWe issue an Electrical Installation Certificate (EIC) and notify the work to building control via NAPIT — no council inspection needed.

Most upgrades take 4–6 hours and are completed in a single visit. Your power is off for the duration of the work — we work as quickly as possible to minimise this.

How much does it cost in Shropshire and Staffordshire?

  • 1–2 bedroom propertyFrom £500
  • 3 bedroom propertyFrom £560
  • 4 bedroom propertyFrom £620
  • 5+ bedroomsFrom £650

All prices include the new consumer unit, all labour, testing, and the Electrical Installation Certificate. We provide a fixed quote before starting — no surprises on the day.

Need help?

Get a free quote from HSMITH Electrical

NAPIT approved · Shropshire & Staffordshire · Fully insured